Table of Contents
Advertisement
12-8
Symbol DS6607 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page 12-31 allows a pause to be inserted in the data transmission. Pauses
are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar
codes "0" and "1" inserts a 0.1 second pause; "0" and "5" inserts a 0.5 second delay. See
Appendix D, Numeric Bar
Codes. To correct
an error or change a selection, scan
Cancel on page
D-4.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule
.
Begin New Rule
Save Rule
Scan this bar code to save the rule.
Save Rule
Advertisement
Table of Contents
