Decode Upc/Ean/Jan Supplementals - Motorola LI4278 Product Reference Manual

Decode UPC/EAN/JAN Supplementals

Parameter # 16
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). The following options are available:
If you select Ignore UPC/EAN with Supplementals, and the linear imager scanner is presented
•
with a UPC/EAN plus supplemental symbol, the linear imager scanner decodes UPC/EAN and ignores
the supplemental characters.
If you select Decode UPC/EAN with Supplementals, the linear imager scanner only decodes UPC/EAN
•
symbols with supplemental characters, and ignores symbols without supplementals.
If you select Autodiscriminate UPC/EAN Supplementals, the linear imager scanner decodes
•
UPC/EAN symbols with supplemental characters immediately. If the symbol does not have a
supplemental, the linear imager scanner must decode the bar code the number of times set via
UPC/EAN/JAN Supplemental Redundancy on page 11-12
there is no supplemental.
If you select one of the following Supplemental Mode options, the linear imager scanner immediately
•
transmits EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol
does not have a supplemental, the linear imager scanner must decode the bar code the number of times
set via
UPC/EAN/JAN Supplemental Redundancy on page 11-12
that there is no supplemental. The linear imager scanner transmits UPC/EAN bar codes that do not have
that prefix immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN on page 11-8
ISBN Format on page
• Enable 977 Supplemental Mode
• Enable 414/419/434/439 Supplemental Mode
• Enable 491 Supplemental Mode
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed
previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit
user-defined prefix. Set this 3-digit prefix using
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
on page 11-12.
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any
prefix listed previously or the user-defined prefix set using
page 11-12.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with
any prefix listed previously or one of the two user-defined prefixes set using
Supplementals on page
NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
characters.
to enable Bookland EAN, and select a format using
11-20.
User-Programmable Supplementals on page
11-12.
SYMBOLOGIES 11 - 9
before transmitting its data to confirm that
before transmitting its data to confirm
User-Programmable Supplementals
User-Programmable Supplementals on
User-Programmable
Bookland
11-12.