Motorola LI4278 Product Reference Manual page 444

Glossary - 6 LI4278 PRODUCT REFERENCE GUIDE
Misread (Misdecode). A condition which occurs when the data output of a reader or interface controller does not agree
with the data encoded within a bar code symbol.
Multi-Point Mode. Up to the maximum number of scanners can be connected to the cradle; Standard cradle - three
scanners; Presentation Cradle - seven scanners.
Multi-Point Mode and Locked Pairing Mode with the CR0078 Presentation Cradle. Up to seven scanners can be
connected to the cradle and the eight scanner connection is rejected. If one of the connected scanners is unpaired
(by scanning
Unpairing on page
of the seven connected scanners is taken out of range (or the battery is removed) the connection maintenance
timeout kicks in and the slot is held for the scanner until the timeout expires. Scan
ensure the connection of the eighth scanner in this mode, which disconnects one of the previously connected
scanners.
Multi-Point Mode and Locked Pairing Mode with the CR0078 Standard Cradle. Up to three scanners can be
connected to the cradle and the fourth scanner connection is always rejected. If three scanners are actively
connected, Lock Override does not work for the fourth scanner.
If one of the connected scanners is unpaired (by scanning
right away.
If one of the connected scanners is out of range (or the battery is removed) the fourth scanner is not be able to
connect until the connection timeout is expired, or the fourth scanner may use the Lock Override bar code to
establish a connection right away.
Multi-Point Mode and Unlocked Pairing Mode with the CR0078 Presentation Cradle. Up to seven scanners can
be connected to the cradle and the eighth scanner connection causes one of the previously connected scanners to
be disconnected.
Multi-Point Mode and Unlocked Pairing Mode with the CR0078 Standard Cradle. Up to three scanners can be
connected to the cradle and the fourth scanner connection is always rejected. If one of the connected scanners is
unpaired, or goes out of range (or the battery is removed) the fourth scanner can connect right away.
N
Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and
negative deviations from this value.
Nominal Size. Standard size for a bar code symbol. Most UPC/EAN codes are used over a range of magnifications
(e.g., from 0.80 to 2.00 of nominal).
NVM. Non-Volatile Memory.
O
ODI. See Open Data-Link Interface.
Open Data-Link Interface (ODI). Novell's driver specification for an interface between network hardware and
higher-level protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of
understanding and translating any network information or request sent by any other ODI-compatible protocol into
something a NetWare client can understand and process.
4-23) the slot is considered to be free and another scanner can take its place. If one
Lock Override on page 4-22
4-23) the fourth scanner can connect
Unpairing on page
to