Msi; Enable/Disable Msi; Set Lengths For Msi - Motorola DS3578 Product Reference Manual

13 - 50 DS3578 With FIPS Digital Scanner Product Reference Guide

MSI

Enable/Disable MSI

Parameter # 0Bh
To enable or disable MSI, scan the appropriate bar code below.

Set Lengths for MSI

Parameter # L1 = 1Eh, L2 = 1Fh
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a specific range.
•
One Discrete Length - Select this option to decode only MSI symbols containing a selected length. Select
the length using the numeric bar codes in
symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. To correct an
error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only MSI symbols containing either of two selected
lengths. Select lengths using the numeric bar codes in
decode only MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then
scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan
•
Length Within Range - Select this option to decode a MSI symbol with a specific length range. Select
lengths using numeric bar codes in
symbols containing between 4 and 12 characters, first scan MSI - Length Within Range. Then scan 0, 4,
1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error or change
the selection, scan
•
Any Length - Scan this option to decode MSI symbols containing any number of characters within the digital
scanner capability.
NOTE Due to the construction of the MSI symbology, it is possible for a scan line covering only a portion of the
code to be interpreted as a complete scan, yielding less data than is encoded in the bar code. To prevent
this, select specific lengths (MSI - One Discrete Length - Two Discrete Lengths) for MSI applications.
Enable MSI
(01h)
Appendix E, Numeric Bar Codes.
Cancel on page E-3.
Appendix E, Numeric Bar
Cancel on page E-3.
Appendix E, Numeric Bar
*
Disable MSI
(00h)
Codes. For example, to decode only MSI
Codes. For example, to
Cancel on page
For example, to decode MSI
E-3.