Table of Contents
Advertisement
12 - 40 Symbol LS3408 Product Reference Guide
MSI
Enable/Disable MSI
To enable or disable MSI, scan the appropriate bar code below.
Set Lengths for MSI
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for MSI to any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only MSI symbols containing a selected length. Select the
length using the numeric bar codes in
with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. In case of an error, or to change
the selection, scan Cancel on
Enable MSI
*
Disable MSI
Appendix D, Numeric Bar
page
D-3.
MSI - One Discrete Length
Codes. For example, to decode only MSI symbols
Advertisement
Table of Contents
