System Settings - Abus 56829 9 User Manual

English

6.6 System settings

Quad Display = four-way display Use the ◄► buttons to switch the quad display
on (ON) or off.
To activate quad mode, all the cameras have to
be activated.
When in quad display, you can use the arrow
buttons to switch directly to full-screen view for
individual cameras.
▲ = camera1;
▼ = camera2;
◄ = camera3;
► = camera4
Note that the cameras that are hidden are not
shown in the quad display.
Warning:
Only the full screen of the triggering channel
is recorded.
To record from all 4 cameras using motion
detection, quad display has to be activated.
Scan Period = dwell time for sequence display You can define the dwell time for sequence
display here. Use the ◄► buttons to choose
between OFF/5 sec/10 sec/15 sec.
If you are not using cameras, hide them in order
to display only the occupied channel.
To switch off sequence display, press the
CH+/CH button. If you want to start manual
recording, press REC.
Warning:
Note that motion detection is only activated
for the channel that is currently displayed.
Time Setting = Date/time settings Press the ► button to switch between
year/month/day/hours/minutes.
Use the ▲▼ buttons to change the values.
Confirm your input with OK.
37