Led Brightness; Out Mode; Foot Switch Mode - Kawai MP6 Owner's Manual

10.2.22 LED Brightness

This adjusts the brightness of the LEDs. You can choose from High or Low.
SYSTEM SYSTEM
The Low setting is designed for dark stages, while the High setting is good for
LED Bright.=High LED Bright.=High
bright ambience.

10.2.23 Out Mode

Sometimes it is convenient to have two mono outputs instead of a stereo
SYSTEM SYSTEM
output.
Out Mode =Stereo Out Mode =Stereo
In this case one mono output can be used for your own monitor system and the
other goes to the mixing console.
Note:
* To avoid unexpected sound issues some stereo e ects like AutoPan will be turned o
when 2xMono is selected.

10.2.24 Foot Switch Mode

This parameter sets the mode of FootSW's function.
SYSTEM SYSTEM
FootSW FootSW =Normal =Normal
Note:
* When the value is 'Setup+', the FootSW CC# page will not be displayed.
Stereo The signal on the Line-Outs is normal stereo.
2xMono
The signal on the Line-Outs is mono on both jacks
Normal: The type of controller assigned to the footswitch is a common SETUP
parameter "FootSW CC#". (see page 46)
Setup+: The footswitch is pushed 1 time, and Setup number will be increased by 1.
63