Menu Buttons - Kawai MP6 Owner's Manual

6. MENU Buttons

Zone parameters (Int)
Zone Mode
Sound (Int only)
Damper Resonance (Int Piano only)
String Resonance (Int Piano only)
KeyO E ect (Int Piano only)
Voicing (Int Piano only)
KeyO Noise (Int EP only)
KeyO Delay (Int EP only)
Tone Wheel Registration (ZONE1 Int Tone Wheel only)
Tone Wheel Percussion (ZONE1 Int Tone Wheel only)
Tone Wheel Percussion Level (ZONE1 Int Tone Wheel only)
Tone Wheel Percussion Decay (ZONE1 Int Tone Wheel only)
Tone Wheel Percussion Harmonics (ZONE1 Int Tone Wheel only)
Key Click Level (Int Drawbar Organ only)
EFX Type
EFX parameter
Amp Simulator On/O (ZONE1 Int only)
Amp Simulator Drive (ZONE1 Int only)
Amp Simulator Level (ZONE1 Int only)
Amp Simulator EQ Hi/Lo (ZONE1 Int only)
Velocity Dynamics
Solo On/O
Solo Mode
Damper Pedal On/O /Hold
Foot Switch On/O
Expression Pedal On/O
Modulation On/O
Bender On/O
Bender Range
Key Range Hi/Lo
Velocity Switch On/O
Velocity Switch Value
Zone Transpose
Volume
Pan
Fine Tune
34
The MENU buttons allow access to the edit parameters in the MP6. This collection
of settings together with other editable parameters can be stored as a SETUP.
The MP6 provides 256 SETUPs, and all are user programmable.
A SETUP consists of four zones. Each zone can be set as Internal, External or Both
individually. Inside each of the four zones, a multitude of features and e ects
can be programmed and combined together into one exciting SETUP.
A total of 256 SETUPs may be programmed in this way.
The menu consists of Internal parameters, External parameters and Common
parameters.
Common parameter a ect all zones. If a zone is set as Both, both the Internal
parameters and External parameters are available for the zone.
Use the MENU buttons to scroll through all the di erent parameters.
In SOUND mode, both the Int Zone parameters and the Common parameters
without the inverse "S(Setup)" icon can be individually stored. (see page 53)
The Int Zone parameters can be stored as a SOUND of the MP6's 256 SOUNDs.
The Common parameters can be stored as the initial settings in SOUND mode.
Zone parameters (Ext)
Zone Mode
Trs Channel
Trs PRG#
Trs Bank Select MSB LSB
Keyboard On/O
Velocity Dynamics
Solo On/O
Solo mode
Damper Pedal On/O /Hold
Footswitch On/O
Expression Pedal On/O
Modulation On/O
Bender On/O
Bender Range
Key Range Hi/Lo
Velocity Switch On/O
Velocity Switch Value
Zone Transpose
Volume
Pan
Fine Tune
Caution:
The edited settings will be erased when the power is turned o , or other sound is
recalled. To save these settings, use the STORE procedure to save them as a SETUP.
(see page 54)
Common parameters
Stretch Tuning
Temperament
Key of Temperament
User Tuning
Foot SW CC#
EXP CC#
Modulation Wheel CC#
Left Pedal Mode
Master Volume