Rear Panel - Kawai MP6 Owner's Manual

1.3 REAR PANEL

1. POWER SWITCH
2. POWER RECEPTACLE
3. MIDI JACKS
4. USB to Host PORT
5. FOOT CONTROLLERS
6. FOOT SWITCH
7. OUTPUTS
8. USB TO DEVICE PORT
Turns the MP6 ON or OFF.
Connect the power cable, which is included in the MP6 package, to this receptacle.
These jacks are used to connect the MP6 with external MIDI devices such as a MIDI sound
module or a MIDI sequencer.
This jack is used to connect the MP6 with a personal computer. See page 83 for details.
EXP JACK
An expression pedal can be connected to this jack.
The expression pedal can be assigned to di erent MIDI control numbers or functions in
the Menu.
DAMPER JACK
This jack is used to connect the Foot Pedal included with the MP6 (KAWAI F-10H).
A momentary footswitch can be connected to this jack (EX: KAWAI F-1 or F-20). The
FootSwitch can be assigned to di erent MIDI control numbers or functions in the Menu.
When using the KAWAI F-20. The right pedal works as a Foot Switch, and the left pedal
works as a Soft pedal. When the Rotary EFX is in use, the Soft pedal changes between
Fast & Slow Rotor speeds.
R, L/MONO OUTPUTS
The R, L/MONO outputs are used to connect the MP6 to a musical instrument ampli er
using standard 1/4 inch phone jacks. The R, L/MONO outputs can also be used to connect
the MP6 to a PA system or recording console.
This port allows a USB memory device to be connected to the MP6.
13