Panel Lock; Organize; Enter The Organize View; Swap Two Programs - Kawai Nord Grand User Manual

16 | Nord GraNd User MaNUal os v1.0x
A "num" symbol in the top right corner of the display indicates that
Numeric Pad navigation is active.
A:1-
Studio 80
Studio Grand 2
Piano80
158
In this example, the Program 1 button has been pressed. The dash (-)
indicates that another digit can be entered, to select program 11-15.

PaNel loCK

The PANEL LOCK feature is found at the far left of the
panel and will – when engaged – protect the panel con-
trols from unwanted interaction. The button needs to be
pressed down for one second, as indicated by the "6"
symbol, in order to turn the function on or off.
To allow for program changes even with Panel lock active, the Program
dial is not affected by this function. also, the Program 1-5 and live
Mode buttons can still be used, but need to be pressed down for one
second to have effect.

orGaNIZe

The ORGANIZE (shift + Program 4) view allows for moving or "swapping"
programs within the program banks.

eNTer THe orGaNIZe vIeW

1
Press ORGANIZE (shift + Program 4)
Program
A:11 Royal Grand 3D
A:12 Nefertiti Mk I
A:13 Amber Upright
A:14 Orch Strings

sWaP TWo ProGraMs

a swap operation interchanges the positions of two programs.
2
Use the dial to select the program location which should be
swapped with another and press Swap.
Program
A:23 Mellow Upright
A:24 Nefertiti Mk I
A:25 Velvet Pad
A:31 Grand Imperial
3
Use the dial to select the destination and press Ok to complete the
swap operation. Pressing Undo will instead cancel the operation.
num
Med
Organize
Swap Move
A:12
Undo Ok

Move a ProGraM

4
Use the dial to select a program which should be moved to another
location and press Move
Program
B:41 Rays Reeds
B:42 Nefertiti Mk I
B:43 Pop Piano
B:44 Organ Flute
5
select the destination location for the operation, using the dial and
press Ok. Pressing Undo will instead cancel the operation.
E Note that programs between the source and destination locations
are shifted one step up or down, changing which programs are
part of each page within the affected range.
M
Programs can also be organized using the Nord Sound Manager.

MIdI led INdICaTor

The MIDI led, located below the Master level dial, blinks as
incoming MIdI messages are received by the MIdI In port, or
over the UsB connection.

PaNIC

If hanging notes are experienced when using the Nord
Grand in a MIdI setup, or if all sound should be termi-
nated for other reasons, use the PANIC (shift + Program
5) function. This will execute an internal "all Notes off"
message, and reset incoming MIdI CC messages.
A:12
Undo Ok