Local Control; Program Change Mode; Midi Receive Mode - Kawai MP6 Owner's Manual

10.2.8 Local Control

SYSTEM SYSTEM
Local Local = On = On

10.2.9 Program Change Mode

This parameter determines the sound numbering format that is used when
SYSTEM SYSTEM
sending MIDI Program Change information.
Prg Mode =Panel Prg Mode =Panel

10.2.10 MIDI Receive Mode

This parameter determines how the MP6 receives MIDI information.
SYSTEM SYSTEM
Rcv Mode =Panel Rcv Mode =Panel
On The keyboard of the MP6 and the internal tone generators are
connected. Set this parameter to "On" for normal use.
O The internal connection between the keyboard and the tone
generators is switched o . This feature will avoid the "Doubled
Sound" that results from use with an external sequencer equipped
with Soft Thru or Echo Thru.
Panel
Program Change data is sent in accordance with the instrument's
panel button numbering format.
GM Program Change data is sent in accordance with the standard GM
numbering format.
Select this setting when connecting the MP6 to GM devices.
Panel Only MIDI information received from the designated system
channel will be sent to Zone 1-4 (Int. only).
With this setting, layer and internal e ects will be available.
Multi MIDI information received from all MIDI channels (1-16) will be sent
to Zone 1-4 or MIDI channels.
With this setting, the MIDI Receive Ch. (10.2.11) can also be speci ed.
59