Reverb - Kawai MP6 Owner's Manual

4.2 REVERB

REVERB type
Rotary 1/2 The Rotary e ect simulates the sound of the rotary speaker cabinet
commonly used with electronic organs. Rotary 2 includes an
overdrive e ect.
Auto Wah
Auto Wah creates an automatic lter sweep at the attack of each note.
Pedal Wah
Pedal Wah creates a
connected to the MP6.
Enhancer Enhancer produces a crisper tone, so the sound is more easily
discernible.
Overdrive
Overdrive e ect adds tube-amp style distortion.
Note: You can select di erent EFX types for each zone.
The MP6 contains 7 high quality REVERB types, designed to complement the
internal sounds. Each internal sound has a preset REVERB type assigned as
the default. The REVERB button turns the REVERB generator ON or OFF for the
selected sound.
To turn the REVERB "ON" for the current sound, press the REVERB button and the
button will light up. REVERB will be added to the current sound.
To turn the REVERB "OFF" again, press the REVERB button again (The light on
the button will be turned o ).
Press and hold the REVERB button until the display shows REVERB type.
REVERB TYPE
1 :Hall 1
Use the VALUE buttons to change the REVERB type. Each REVERB type has a
default value for TIME, so when changing the REVERB type, the value is changed
automatically.
Hall 1 Simulates the reverb in a standard hall
Hall 2 Simulates the reverb in a small hall
Stage 1
Simulates the reverb on a standard stage
Stage 2
Simulates the reverb on a small stage
Room 1 Simulates the reverb in a standard room
Room 2 Simulates the reverb in a small room
Plate Simulates the reverb of a metallic plate
Note: REVERB type is common to all internal zones. You cannot select a di erent
type for each zone. But you can individually turn on/o or set di erent depths for
each zone.
lter sweep with the expression pedal
27