Modulation Wheel Cc# (Control Change); Left Pedal Mode; Master Volume - Kawai MP6 Owner's Manual

6.3.7 Modulation Wheel CC# (Control Change)

This parameter assigns a Control Change Number to the Modulation Wheel on
COMMON COMMON
the right side of the front panel.
M.WheelCC# = Mod M.WheelCC# = Mod
See page 93 for the list of Control Change numbers.
Note:
When the following Numbers are selected for the FootSW,EXP or Modulation
Wheel Control Change Number, the functions a ect the internal sounds, too.

6.3.8 Left Pedal Mode

This parameter determines whether the left pedal of the optional F-20 (twin
COMMON COMMON
pedal) accessory functions as Soft or Sost (Sostenuto).
Left Pedal =Soft Left Pedal =Soft

6.3.9 Master Volume

Adjust the total volume of the SETUP.
COMMON COMMON
The value changes from 0 to 127.
SMaster Vol= 127 SMaster Vol= 127
1 Modulation Wheel (MOD)
7
Volume (VOL)
10 Pan (PAN)
11 Expression Controller (EXP)
64 Damper Pedal (HLD)
66 Sostenuto (SST)
67
Soft Pedal (SFT)
Right Pedal
(FSW)
Left Pedal
F-20
Soft The Left Pedal works as a Soft Pedal ( Default ).
When the Rotary EFX is in use, the Soft Pedal changes function to a
Fast/Slow Rotor switch.
Sost
The Left Pedal works as a Sostenuto Pedal.
When the Damper setting (see page 41) is O or Norm, the
pedal works with natural decay. When the Damper setting is Hold,
the sostenuto pedal works with a steady sustain level.
sostenuto
47