Table of Contents
Advertisement
10. SYSTEM Button
10.1 System Menu
10.2 System Parameters
10.2.1 System Channel
SYSTEM
SYSTEM
System Ch
System Ch
56
Use this mode to set the System parameters of MP6.
To enter the SYSTEM mode, press the SYSTEM button.
Use the MENU buttons to scroll through the System parameters.
System Parameter
System Channel
Touch
System Tuning
Volume Slider Action
Reverb O set
EQ O set
Local Control On/O
Program Change Mode
MIDI Receive Mode
MIDI Receive Channel
MIDI Transmit SETUP Mode
MIDI Transmit Program Change
MIDI Transmit Bank
MIDI Transmit Volume
MIDI Transmit Control Change
MIDI Transmit Recorder
MMC On/O
MMC Assign
MMC Device ID
LCD Contrast
LED Brightness
Out Mode
Foot Switch Mode
Wheel Mode
System Reset
Reset One Sound/Setup
Reset All
Make sure the SYSTEM button is lit, then press the MENU buttons until the
parameter you wish to edit appears in the display.
Set the value of the parameter by using the VALUE buttons.
The value range di ers depending on the parameter.
The System Menu parameters are global and always stored automatically when
leaving the SYSTEM mode, so there is no need to store them.
This parameter sets the System MIDI channel on which System Exclusive
messages are transmitted/received.
=
=
1
1
Advertisement
Table of Contents
