Selecting A Setup - Kawai MP6 Owner's Manual

Stage piano

Hide thumbs Also See for MP6:

Table of Contents

The transmitted program number is shown in the display.

001:000-000 01

You can also send program change numbers by using VALUE buttons.

Note:

Full program change numbers including bank numbers can be transmitted by

setting them in MENU and saving it as a SETUP. See page 39/40 for details.

2.9 Selecting a SETUP

The MP6 o ers 256 preset combinations of the panel settings called SETUPs.

To select a SETUP, press the SETUP button. Now the SOUND SELECT buttons are

used to select a SETUP. Use a combination of the numbers in the upper, second

and third rows to select a desired SETUP. The display will show the selected

SETUP name.

GrandPno1+Str1

To check the sound (internal) or program number (external) assigned to each

zone, press the ZONE SELECT button. The display brie y shows the assigned

sound name or program number, and then automatically returns to the SETUP

name in a few seconds.

If you hold a ZONE SELECT button for 2 seconds the display will show you the

key range information for that zone. You can also set the key range using the

same procedure that is used in Sound mode.

Table of Contents