Kawai MP6 Owner's Manual page 29

19. ROTARY 2
20. AUTO WAH
21. PEDAL WAH
22. ENHANCER
23. OVERDRIVE
REVERB parameter list
1. HALL 1
2. HALL 2
3. STAGE 1
4. STAGE 2
5. ROOM 1
6. ROOM 2
7. PLATE
Note:
When EFX/REVERB depth is set to 0 while the EFX/REVERB button is active, the
EFX/REVERB button will blink to indicate that the EFX/REVERB is turned ON but
the depth is set to 0.
EFX rate and REVERB time are e ective to internal zone only.
If the selected zone is set to BOTH, changing the value for EFX depth or REVERB
depth a ects for both internal and external sections. If you want di erent settings
for internal and external sections, rst enter the edit mode by pressing the MENU
button and press the EFFECT button. Now you can select internal or external zone
with ZONE SELECT button. (See page 35 for details.)
Quick Change Reverb O set
Press and hold the EFFECT button. The EFFECT button starts blinking and the
following screen for Reverb O set (see page 58) will be shown until the button
is released.
Rev.Offset
This parameter is stored automatically when leaving the screen, there is no need
to store the setting manually.
slow/fast -
sense 0 -127
sense 0 -127
intensity 0 -127
drive 0 -127
REVERB Time
rev.time 0.3 - 8.0s
rev.time 0.3 - 8.0s
rev.time 0.3 - 5.0s
rev.time 0.3 - 5.0s
rev.time 0.3 - 3.0s
rev.time 0.3 - 3.0s
rev.time 0.3 - 3.0s
10 - 0%
drive
dry/wet
dry/wet
wet level
dry/wet
REVERB Depth
send level
send level
send level
send level
send level
send level
send level
29