Table of Contents
Advertisement
10.2.3 System Tuning
SYSTEM
SYSTEM
SysTune
SysTune
= 440.0
= 440.0
10.2.4 Volume Slider Action
SYSTEM
SYSTEM
VolAction=Catch
VolAction=Catch
10.2.5 Reverb O set
SYSTEM
SYSTEM
Rev.Offset =100%
Rev.Offset =100%
10.2.6 EQ O set On/O
SYSTEM
SYSTEM
EQ Offset
EQ Offset
10.2.7 EQ O set
SYSTEM
SYSTEM
EQ High
EQ High
SYSTEM
SYSTEM
EQ Mid
EQ Mid
SYSTEM
SYSTEM
EQ Low
EQ Low
58
This parameter sets the global master tuning of the MP6. The value changes
from 427.0 to 453.0 (Hz).
This parameter sets how the volume sliders react, when you change the volume.
Normal
The value changes immediately, when the volume slider is moved.
Catch
The value won't change until the volume slider catches the position
of the previously saved Volume value. This setting is designed for
live editing to prevent you from unexpected volume jumps.
This parameter sets the global reverb depth o set. The value changes from 0 to
100%. You can decrease the whole depth of the MP6.
This parameter sets the global EQ.
= On
= On
On
The global EQ settings are added to the EQ knob settings.
O
The global EQ is disabled.
This parameter sets the global EQ o set value of the MP6. The value changes
from -9 to +9 (dB).
=
=
0
0
These parameters - High, Mid and Low - are each added to the EQ knob
settings.
=
=
0
0
In the case that the total value exceeds +-9dB, it is limited to +-9dB.
When the EQ O set On/O is set to O , this page won't be displayed
=
=
0
0
Advertisement
Table of Contents
