Eq (Equalizer) - Kawai MP6 Owner's Manual

5.2 EQ (EQUALIZER)

Lo Mid MFrq Hi Lo Mid MFrq Hi
+9 +9 -9 2240 +9 -9 2240 +9
Quick Change EQ O set
30
The MP6 contains a three-band graphic equalizer to shape the overall tone of
the sound. The EQ a ects all zones at the same time. However, each SETUP can
have its own EQ setting that a ects the internal sounds only.
Be sure that the EQ button in the CONTROL KNOBS section is lit.
If the EQ button is turned o , press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the EQ parameters. Use
the CONTROL KNOBS to change the current settings.
Each parameter of the EQ has an adjustable range from -9 to +9. A positive (+)
value indicates ampli cation, or a boost of that frequency range. A negative (-)
value indicates attenuation, or a cut of that frequency range.
The MFreq parameter has an adjustable range from 355Hz to 2500Hz.
Lo, Mid, Hi
-9 - +9
MFrq (Hz) 355, 400, 450, 500, 560, 630, 710, 800, 900, 1000, 1120, 1250, 1400,
1600, 1800, 2000, 2240, 2500
Press and hold the EQ button. The EQ button starts blinking and the following
screen for EQ O set (see page
EQ Offset
+0 -1 +9
This parameter is stored automatically when leaving the screen, there is no need
to store the setting manually.
If EQ O set is set to O in System parameters, this page will not be displayed.
58) will be shown until the button is released.