Hitachi KP-FD500GV Operation Manual page 32

(17) WHITE SPOT MANUAL SETTING ： Setting of manual whit spot correction
・POSITION X ： X-coordinate of the pixel to be corrected
Command name
Address
Values (Factory setting 0) ： 1 to WIDTH MAX
・POSITION Y ： Y-coordinate of the pixel to be corrected
Command name
Address
Values (Factory setting 0) ： 1 to HEIGHT MAX
・ADD ： Specified position is added to white spot list
Command name
Address
Values (write only)
・DELETE ： Specified position is deleted from white spot list
Command name
Address
Values (write only)
(18) BALANCE ADJUST ： Setting for balance of Left and Right screen
・MODE ： Select the mode
Command name
Address
Values (Factory setting 2) ： 0 "Off"
・RIGHT GAIN ： Setting for the gain value of right screen
Command name
Address
Values (Factory setting 32) ： 0 to 63
・RIGHT BLACK LEVEL ： Setting for the black level of right screen
Command name
Address
Values (Factory setting 128) ： 0 to 255
1 to HEIGHT MAX
： WhiteSpotManualPositionX (Integer / Custom）
： A0FF00D8 h
： WhiteSpotManualPositionX (Integer / Custom）
： A0FF00DC h
： WhiteSpotManualAddition (Command / Custom）
： A0FF00D0 h
： 1 When 1 is written, the pixel specified by POSITON X/Y is added to list.
： WhiteSpotManualDelete (Command / Custom）
： A0FF00D4 h
： 1 When 1 is written, the pixel specified by POSITON X/Y is deleted from list.
： BalanceAdjustMode (Enumeration / Custom）
： A0FF0070 h
Not perform balance adjustment.
1 "Manual" Perform manual balance adjustment.
2 "Auto" Perform automatic balance adjustment.
： BalanceAdjustGainRaw (Integer / Custom）
： A0FF0074 h
When MODE is Manual, set basic gain of right screen in the range from
-1.1456dB to +1.1455dB in 64 steps.
： BalanceAdjustBlackLevelRaw (Integer / Custom）
： A0FF0078 h
When MODE is Manual, set basic offset of right screen in 256 steps.
Y-coordinate of registered white spot position is shown.
Specified X-coordinate to be added to (or to be deleted from) list.
Specified Y-coordinate to be added to (or to be deleted from) list.
*for only KP-FD500GV/F500GV
19