Introduction; Safety Information - Martin Stage Cyclo User Manual

Introduction

Thank you for selecting the Martin Stage Cyclo. The Stage Cyclo is
designed for wash illumination of sets, features, and artists. A patented
optical system ensures effective color mixing, allowing the fixture to be
positioned close to illuminated surfaces without color hot-spots.
The Stage Cyclo can be controlled via DMX or programmed with a stand-
alone light show (which it can run alone or in a synchronized group). It has a
wide range of mounting options, including stacking to form dynamic color-
changing light walls. Four dimmable T5 high-output fluorescent tubes
combine high efficiency, bright color and long lamp life.
The Stage Cyclo features:
• Full 0-100% intensity control of red, green, blue and white tubes to give
RGB color mixing and fine-tuned color temperature
• High output, long life T5 fluorescent tubes
• Tough steel case with rubber corner protectors and carrying handle
• XLR 3-pin, XLR 5-pin and RJ-45 DMX connectors.
• One-tenth peak angle 107° x 121°
• Optional accessories include an adjustable bracket that allows flexible
rigging options.
Important! Read this manual before attempting to install this product.
Updated user manuals for this and all other Martin products are available
from the Support area of the Martin website at http://www.martin.com.
S a f e t y i n f o r m a t i o n
Warning! This product is for professional use only. It is not for household
use.
This product presents risks of lethal or severe injury due to fire and heat,
electric shock and falls. Read this manual before powering or installing this
fixture, follow the safety precautions listed below, and observe all warnings
in this manual and on the fixture. If you have any questions about how to
operate this fixture safely, contact your Martin dealer or call the Martin 24-
hour service hotline at +45 70 200 201.
Introduction 5