Search and select recording to playback in the Playback Interface.
1.
Click the Play button to begin playback of selected recording and the Pause button to pause playback.
2.
You may slow down or speed up the playback speed by clicking the Decrease Speed/Increase Speed button.
3.
Click the Full‐Screen button to enter full‐screen playback mode, shown in Figure 30
4.
In full‐screen mode, you may hide the toolbars by clicking the Hide Toolbar button. Clicking the Exit Full‐Screen
5.
button will return you to the original playback mode.
Click the Enable/Disable Audio button to turn on and off audio during playback.
6.
Click the Digital Zoom button to enable digital zoom. Once enabled, the regular recorded feed will be shown in
7.
the lower right corner while the zoomed in view will be shown on the full screen. The zoomed in region may be
changed by moving the red rectangle in the regular recorded feed window.
Click the Exit button to return to the previous menu.
8.
Smart search
In order to locate motion detection event easily and accurately in the playback progress line, the users are allowed to analyze a
certain area(scene) dynamically, and to get all of the related motion detection events that occurred in this area.
Note:
The smart search function is only available for analog channels.
To use this function:
1. Go to playback interface and play the video
2. When you move your mouse into the video window, the icon of mouse will turn to a pen , you can drag an area for
motion detection analysis .The button
screen area.
3. After selecting the area, click the button
timeline. Time line turns to red when motion detection events happen.(see in Figure 31)
4. You can to get the scene you need conveniently by moving the green vertical line or you can click 'Next Motion ' and
'Previous Motion' to move between the neighbor events.
Figure 30. Full-Screen Playback Mode
used for clearing all the area, and the button
to search, you will get the motion detection events easily from the long
used for choosing the full-
39