Exporting & Importing Configuration - HIKVISION DS-9000 Series User Manual

Enter the Factory Default menu, shown in Figure 64 by going to Main Menu > Maintenance > Factory Default.
1.
Select the OK button to restore factory defaults or select the Cancel button to return to the previous menu.
2.
Network information such as IP address, subnet mask and gateway will not be restored.
Note:
Exporting & Importing Configuration
Configuration information from your DVR can be exported to a USB storage device and imported into another DVR. This
will allow you to efficiently setup the same configuration on numerous DVRs.
To export DVR configuration:
Enter the Export/Import Configuration menu, shown in Figure 65 by going to Main Menu > Maintenance >
1.
Export/Import Configuration.
Connect the USB storage device to a USB port on the DVR.
2.
Click the Refresh button. The contents of the USB storage device will be shown on the screen.
3.
Click the New Folder button to create a new folder or the Delete button to delete a file/folder.
4.
Select the location where you would like the configuration to be stored on the USB storage device.
5.
Figure 64. Factory Default Menu
Figure 65. Import/Export Configuration Menu
69