Deleting A User - HIKVISION DS-9000 Series User Manual

Under Users List, click on Select this entry to add new user.
2.
Once a new entry has been selected, the fields under Users will become editable. Enter the information for
3.
Name, Password and Verify.
In the Remote Permissions panel, select the functions that you would like to give the user access to remotely.
4.
You may also check the All checkbox to give full control to the selected remote user. These functions include:
Log Search: View logs that are saved on the DVR.
•
Serial Port Control: Configure settings for RS232 and RS485 ports.
•
Two-Way Audio: Ability to use two‐way radio between the remote client and the DVR.
•
Advanced Control: Manage hard disk drives (initializing and setting properties for HDDs). Ability to remote
•
update system firmware and stopping of the relay output.
Live View: Access the Live Feed.
•
PTZ Control: Control PTZ cameras.
•
Configuration: Configure parameters, restore parameters to factory defaults and import settings to as well
•
as export settings from DVR.
Video Output Control: Configure settings for video output.
•
Alarm Control: Alert or control the relay output of the DVR. Alarm and exception settings must be
•
configured properly to upload to host.
Shutdown/Reboot: Shutdown or reboot the DVR.
•
Playback: Playback recordings remotely.
•
Camera Management: Enable and disable analog channels. Add and delete IP cameras.
•
All: Full permission to use all functions.
•
Click the Save button to save user settings and click Done to return to the previous menu.
5.
Note:
Users both have the local access permission and the remote access permission.
Note:
The Remote permission configuration is used for remote login. If you use the account (like guest) for local login,
you still have all the permissions.
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to obtain a
Note:
secure code to reset your DVR.
User settings only appear on the list of System Configuration when login with Administrator accounts.
Note:
You can go to Lock Menus menu easily by clicking the' Lock menus' button on the bottom of the User setting menu.
Note:
Deleting a User
To delete a user from the DVR:
Figure 39. Remote User Settings Menu
46