Terms And Definitions; Declaration Of Conformity - Kärcher WATERCLEAN 600 CD Service Handbook

WTC 600 LP / MP
1.5

Terms and Definitions

The following scripts will be used for this manual:
Item
keys
LED's
inlets/outlets
operating settings
operating parameters
operating modes
operating conditions
operating failure
The following abbreviations will be used:
– Cy-perm permeate conductivity
– t-perm permeate temperature
Remark: The terms on/off as well as STOP and OPERATION could cause mix-ups; they are
therefore defined as follows:
– On/off describes the existence/non-existence of the mains supply voltage
– STOP and OPERATION describe an operating condition which obviously only can exist
when the system is switched on.
1.6

Declaration of Conformity

The Control Unit complies with the following standards and test regulations:
(to be fixed in the framework of the CE conformity standards)
Service Handbook 08.2004
Script
capital letters + bold
capital letters + bold
capital letters + bold
italics
italics
capitals + underligned
capitals + underligned
capitals + underligned
Examples
LEFT, UP, DOWN
RINSE, DISPOSAL
PUMP FAILURE, INLET VALVE
ps-hard water, ps-pumps
LIM, t-rinse
STOP, ON
PRODUCTION; DISPOSAL
MOTOR FAILURE, FORCED STOP
APPENDIX
71