Patrols - HIKVISION 5 Inch Network High Speed Dome User Manual

37
5 Inch Network High Speed Dome User Manual
Figure 4.2.21 Modify Preset Figure 4.2.22 Modify Preset

4.2.4 Patrols

Set Patrol: Click the icon from the Preview interface, click the Patrol Setting button or select Patrol Setting from the
right-click submenu to enter the patrol settings menu. As shown in Figure 4.2.23. In the Patrol Setting menu, user may select a patrol
number to be programmed from the drop-down list, and then add a patrol point, in which the preset number (1~256), dwell time
(1~128 seconds) and dwell speed (1~ 40) can be set. Click Save to finish the settings of the current patrol number. Continue to set
other patrol numbers by following the same steps.
Up to 8 patrols can be added, and each patrol can be configured with a maximum of 32 presets.
Note:
Figure 4.2.23 Patrol Setting Figure 4.2.24 Patrol Setting
Call Patrol: Select a predefined patrol from the list and click Call the Patrol button to call a patrol. Refer to Figure 4.2.25.
Stop Patrol: Select a predefined patrol from the list and click Stop the Patrol button to stop a patrol. Refer to Figure 4.2.26.