Aux; Clear - HIKVISION 5 Inch Network High Speed Dome User Manual

5 Inch Network High Speed Dome User Manual
blanking area. After completion, press IRIS+ to save settings, and the window color will turn to gray.
The tilt range for configuring the window blank area is from 0~70°and 110~180°.
Note:

CLEAR WINDOW
Enter the CLEAR WINDOW menu to delete the current window blank.

3.3.9 AUX

An auxiliary output is a configurable signal from the dome back box that can trigger another device to operate. Refer to Figure 3.3.23
for the AUX settings menu.

AUX NUMBER
Select AUX1 or AUX2 through this item.

AUX MODE
It is used for defining alarm output type. Available settings include ALWAYS OPEN (default) and ALWAYS CLOSE, which
correspond to normally open and normally closed respectively.

3.3.10 CLEAR

Refer to Figure 3.3.24 for the CLEAR settings menu.
Use this menu to clear all user-defined settings, including presets, patrols, patterns and privacy mask.
Figure 3.3.23
<CLEAR>
<CLEAR ALL PRESETS>
<CLEAR ALL PATROLS>
<CLEAR ALL PATTERNS>
<CLEAR ALL PRIVACY MASK>
BACK EXIT
Figure 3.3.24
22