Patrols - HIKVISION 5 Inch Network High Speed Dome User Manual

5 Inch Network High Speed Dome User Manual
corresponding number will appear; while no preset is defined, it will display UNDEFINED. The presets which are predefined for
specific functions will not be displayed and no change is allowable. Please refer to page 9 for presets with specific functions.

SET PRESET LABEL
Select SET PREST LABEL to enter the menu shown in Figure 3.3.15, and then press IRIS+ button to enter the menu for editing the
preset label. Refer to Figure 3.3.16.
Use the following functions buttons on the keyboard or the DVR front panel to edit preset label:
IRIS+: Confirm and save the current settings and return to the previous menu.
IRIS-: Cancel the current operation and return to the previous menu.
FOCUS+: Select and enter the character.
FOCUS-: Delete the character currently entered.
Direction Buttons: Move the cursor to select the numbers/lowercases/capitals/symbols.
PRESET LABEL
IRIS- CANCEL
IRIS+ OK

EDIT PRESET SCENE
Select EDIT PREST SCENE to enter the menu, use the direction buttons to move PTZ to the desired scene and then press the IRIS+ to
confirm the settings and return to the previous menu, or press IRIS- to cancel settings.
the setting of preset scene will be restricted by the limit stops if defined.
Note:

CLEAR PRESET
This feature is used for clearing the current preset.

3.3.6 PATROLS

The PATROLS settings menu is shown in Figure 3.3.17.

PATROLS NUMBER
The dome provides 8 patrols numbering from 1 to 8.
PATROL NUMBER
<PATROL EDIT>
<PATROL PERVIEW>
<PATROL CLEAR>
PRESET1
Figure 3.3.15
<PATROLS>
1
BACK EXIT
Figure 3.3.17
Figure 3.3.16
Figure 3.3.18
19