HIKVISION 5 Inch Network High Speed Dome User Manual page 18

5 Inch Network High Speed Dome User Manual

AUTO FLIP
The dome will rotate 180 degrees when the camera tilts downward and goes just beyond the vertical position. When the dome rotates
(flips), the camera starts moving upward as long as you continue to hold the joystick in the down position. Once you let go of the
joystick after the dome rotates, joystick control returns to normal operation. The auto-flip feature is useful for following a person who
passes directly beneath the dome.

PROPORTIONAL PAN
When the PROPORTIONAL PAN is set to ENABLE, the dome will automatically reduce or increases the pan and tilt speeds in
proportion to the amount of zoom. At telephoto pan and tilt speeds will be slower for a given amount of joystick deflection than at
wide zoom settings. This keeps the image fast on the monitor when there is a large amount of zoom.
When the PROPORTIONAL PAN is set to DISABLE, it will be difficult to trace the object at low pan and tilt speeds or no movement
in large amount of zoom.
This feature is enabled all the time while setting the patterns.
Note:

PARK TIME (SECS)
This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a configured period of inactivity.
Park time can be configured from 5 to 720 seconds.
If no control signal is received for a period of time under the following circumstances, no automatic actions will be performed:
Note:
1. In the process of performing dome actions by callup of special presets; 2. In the process of performing external alarm response
actions.

PARK ACTION
This feature will define the activity when the dome parks. The selectable park actions include: presets1-8, patterns 1-4, patrols 1-8,
auto scan, tilt scan, random scan, frame scan, panorama scan, or disable.

SCAN SPEED
Scan speed is the degrees per second of the auto scan, tilt scan, frame scan, random scan and panorama scan. Scan speed is adjustable
from 1 to 40 degrees per second through the camera menu.

FRESET FREEZE FRAME
This feature freezes the scene on the monitor when going to a preset. This allows for smooth transition from one preset scene to
another.

MOTION SPEED LEVEL
The manual dome movement speed can be set to HIGH, MIDDLE or LOW.

PRESET SPEED LEVEL
The speed of preset callup can be set from level 1 to 8. The higher level corresponds to the faster preset callup.

LIMIT SETTINGS
Limit stops are configurable stops that limit the pan and tilt range of the dome. There may be left/right and up/down limit stops
Figure 3.3.11
<MOTION>
MOTION SPEED LEVEL MIDDLE
PRESET SPEED LEVEL
<LIMIT SETTINGS>
BACK EXIT
Figure 3.3.12
17
4