Main Menu; System Information; System Settings - HIKVISION 5 Inch Network High Speed Dome User Manual

5 Inch Network High Speed Dome User Manual

3.1 MAIN MENU

After logon to IE browser or client software, call preset 95 to access the main menu of the dome. Refer to Figure 3.1.1.
Click the direction buttons on PTZ control section to move the cursor to the selected menu item. Press IRIS+ to confirm, i.e., operation
can be done on this menu options. If current menu contains sub-menu, enter the corresponding sub-menu.
To perform operation on menu option, the selected number behind menu item can be changed by clicking up and down buttons. Click
IRIS+ to confirm and return to previous menu. The same procedure is followed for the next operation for which no description is given.
Select Exit menu option to confirm and exit from menu operation.
<SYSTEM INFORMATION>
<SYSTEM SETTINGS>
<FACTORY SETTINGS>
<RESETCAMERA>
<REBOOT SYSTEM>
EXIT

3.2 SYSTEM INFORMATION

This menu displays current dome system information, as shown in Figure 3.2.1. Information in menu option cannot be changed and
Temperature refers to internal temperature of dome.
Move the cursor to Back and click IRIS+ to return to the previous menu, or move the cursor to Exit and click IRIS+ to save the settings.
Operation is similar to all other submenus.

3.3 SYSTEM SETTINGS

Enter the SYSTEM SETTINGS menu, as shown in Figure 3.3.1 and Figure 3.3.2.
Enter the next page by moving the cursor beside NEXT PAGE and click IRIS+ button.
Note:
<SYSTEM INFO SETTINGS>
<CAMERA>
<MOTION>
<LINE SYNC>
<PRESETS>
<PATROLS>
NEXT PAGE
MAIN MENU
Figure 3.1.1
<SYSTEM SETTINGS>
BACK EXIT
Figure 3.3.1
<SYSTEM INFORMATION>
MODEL DS-2DF1-517
ADDRESS
COMMUNICATION 2400,8,1
TEMPERATURE 33℃
SOFTWARE VERSION 2. 0.1
LANGUAGE ENGLISH
BACK EXIT
Figure 3.2.1
<SYSTEM SETTINGS>
<PATTERNS>
<PRIVACY MASK>
<AUX>
<CLEAR>
BACK EXIT
Figure 3.3.2
12
0