28
5 Inch Network High Speed Dome User Manual
Figure 4.1.6 Remote Configuration
4.2Access by Client Software
4.2.1 Configuration through Client Software
After the installation of iWMS-4000 (V2.0), click Start->>Program->> iWMS-4000 (V2.0) to start the client software and a dialog box
of Register Administrator will appear, as shown in Figure 4.2.1. Input the user name and password for registration.
The password should be no less than 6 characters.
Note:
Figure 4.2.1 Register Administrator
/After the registration is succeed, input the user name and password in the User Login dialog box and then click Login to enter the
Preview interface. Refer to Figure 4.2.3: