Configuration By Ds-9000 Series Dvr - HIKVISION 5 Inch Network High Speed Dome User Manual

38
5 Inch Network High Speed Dome User Manual
Figure 4.2.25 Call Patrol Figure 4.2.26 Stop Patrol

4.3 Configuration by DS-9000 Series DVR

Prior to configuration for the network speed dome through DS-9000 series Hybrid DVR, please make sure the speed dome has been
connected to the same network segment with DVR and the network settings for DVR has been properly configured. In DS-9000 DVR,
click Menu->>Setting->>Camera to enter the camera management menu, and then select Add to enter IP Channel Settings menu, as
shown in Figure 4.3.1.
Figure 4.3.1 Camera Management Figure 4.3.2 IP Channel Settings
If the network speed dome and DVR are in the same segment, select the device from the list to be added and then input the user name
and password in the lower dialog box, and finally click OK to add the device. Refer to Figure 4.3.2.
If the network speed dome is offline or not in the same segment with DVR, manually input the parameters of the device, including IP
address, manage port, channel port, user name and password, and finally click OK to add the device. The connection between dome
and DVR will be automatically established when the dome is online or the device is successfully added.