Clickshare Installation; Installation Methods For The Base Unit; Wall Mounting - Barco ClickShare Installation Manual

4. CLICKSHARE INSTALLATION

About this chapter
The installation chapter gives an overview of the different ways to install and connect ClickShare's Base unit.
Overview
•

Installation methods for the Base unit

• Table mounting
•

Wall mounting

• Video signal connections to the Base unit
• Audio connection
• LAN connection
• Power connection
4.1 Installation methods for the Base unit
For optimal performance, install the Base unit close to the display and avoid obstacles between the Base unit
and the Buttons.
Introduction to the installation methods
The Base unit can be installed in different ways in a meeting room.
• Table mount
• Wall mount
The articulated antennas are removable. They can rotate for better wireless connection and they can
W
ARNING
4.2 Table mounting
Overview
Put the Base Unit directly on the meeting room table.
The total weight of the Base Unit is 530 g.
4.3 Wall mounting
About wall mounting
Use the mounting brackets, inserted in the ClickShare box, to mount the Base unit on the wall.
The total weight of the Base Unit is 530 g.
Necessary tools
• a drill (type of drill depends on the type of wall)
• Flat screwdriver
• Additional screwdriver that matches the mounting screws (mounting screws not delivered)
R5900014 CLICKSHARE 16/09/2013
:
Ceiling mount is not allowed !
4. ClickShare installation
17