About The Button - Barco ClickShare Installation Manual

4 VGA display connector
5 HDMI connector
6
USB port
7
Power connection
Mechanical fixture points
The mechanical fixture points are located at the bottom of the Base Unit
Antenna
Two antennas are included in the ClickShare box. To avoid damage during transport, they are not pre-mounted.
The antennas can rotate for a better wireless connection.
Usage of antennas other than the ones provided with the unit are allowed within the restrictions on usage of other antennas defined
by local regulations. Barco does not take responsibility for damage or disturbance of other devices that may be caused by using a
different antenna. The use of an active power amplifier is not allowed.
Antenna type : Dipole
Gain : Maximum 2dBi peak gain in 2.4GHz and 5Ghz band
Bottom layout of the Base Unit
The serial number label with the applicable certification logos is stuck at the bottom of the Base Unit.
The serial number label contains:
• the Barco logo
• the Barco part number
• the serial number
• the revision number
• the production date (week/year)
• markings for applicable standards (CE, CCC, UL, ...)
• markings for waste regulation
• "Made in ..."
2.4

About the Button

Buttom
A Button toggles the sharing of the individual PC or MAC screen on the meeting screen.
Button layout
A Button consists of three main components.
1
Image 2-4
Button layout
1
USB connector
2 Button
3 LED ring
Table 2-6
R5900014 CLICKSHARE 16/09/2013
2 3
2. ClickShare Specifications
9