Arris Touchstone TM702 User Manual page 23

Getting
Safety Started
Battery
Installation Installation
Making USB Connections
Making Telephone Connections
Touchstone TM702 Telephony Modem User's Guide
USB Ethernet
Drivers Configuration
5 (Telephony Modems with USB ports only) Connect one end of the blue USB
cable to the USB port on the computer, and the other end to the blue USB
port on the back of the Telephony Modem (E).
Your computer should detect the Telephony Modem and begin installing the
drivers. See Installing USB Drivers on Your PC
6 Connect one end of the telephone cable to one of the grey telephone ports
on the back of the Telephony Modem (A or B). Connect the other end to the
telephone.
Note: If you have a phone with two separate lines on a single RJ-14 cord,
plug it into the port labeled "Tel 1/2".
Usage Troubleshooting
for driver installation details.
Glossary
23