Arris Touchstone TM702 User Manual page 14

Getting
Safety Started
Battery
Installation Installation
TM702G 2-cell Battery Installation and Replacement
This model of the Telephony Modem has the ability to provide battery backup in
the event of a local power loss. The battery backup is not intended to take the place
of AC power. Use this procedure to install and to replace the backup batteries.
Latch End
Battery Slot
Battery Guide
Touchstone TM702 Telephony Modem User's Guide
USB Ethernet
Drivers Configuration
1 Insert a finger into the latch opening, press down and pull back on the latch
holding the battery door (on the bottom of the Telephony Modem). Pull the
door toward you. Set the door aside in a safe place.
2 Hold the battery pack so that the guides on the battery align with the slots
on the Telephony Modem and slide the battery into the bay. The diagram on
the left shows the proper orientation.
Note: Batteries will not insert completely into the Telephony Modem if not
oriented correctly. The battery should slide into the bay without significant
force. Line up the guides on the battery with the slots in the battery bay.
Usage Troubleshooting Glossary
14