Cannot Establish A Local (Out-Of-Band) Management Session - Allied Telesis AT-9448Ts Installation Manual

At-9400 series gigabit ethernet switches
Hide thumbs Also See for AT-9448Ts:
Table of Contents

Advertisement

Cannot Establish a Local (Out-of-Band) Management Session

If you are unable to establish a local (out-of-band) management session
through the Terminal Port on the master switch of the stack, do the
following:
Check to be sure that the RJ-45 serial management cable is securely
connected to the serial terminal port on the switch and to the RS-232
port on the terminal or personal computer.
Check to be sure that the operating parameters on the terminal or the
terminal emulation program have been set correctly. The default
settings for the RJ-45 serial terminal port can be found in "Starting a
Local Management Session" on page 53.
AT-9400 Stack Installation Guide
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-9424tsAt-9448ts/xpAt-9424ts/xpT-9424ts

Table of Contents