Preparing The Switches Of The Stack - Allied Telesis AT-9448Ts Installation Manual

Chapter 3

Preparing the Switches of the Stack

The chapter contains the following procedures:
"Verifying the AT-S63 Version Number" on page 52
"Choosing Static or Dynamic Module ID Numbers" on page 55
"Labelling the Switches" on page 56
"Assigning the Static Module ID Number 1 to the Master Switch" on
page 58
"Assigning a Static Module ID Number to the Member Switches" on
page 61
"Cabling the AT-StackXG Stacking Modules" on page 62
"Powering On the Switches of the Stack" on page 65
"Verifying the Installation" on page 67
"Troubleshooting the Discovery Process" on page 71
51