Testing; Test Screen; Testing Test Screen - PRG bad boy User Manual

Testing

Test Screen

The luminaire provides built-in test routines and
recalibration options which can be accessed through the
Menu Touchscreen. Actions may be applied to specific
mechanisms, or in some cases, to all mechanisms at
once. At the Home screen, press the Test panel to bring
up the Test screen.
Testing options are as follows:
• Re-Cal - press to bring up Recalibration Screen.
• Re-Call ALL - press to bring up Re-Cal ALL Yes/
No options.
• Disable - press to bring up Disable Screen.
• Mech Test - press to bring up Mech Test Screen.
(See "Mechanical Tests" on page 42
explanation of this screen.)
• Clean Lenses- press to position lenses so that all
surfaces may be cleaned with a cloth. (Note that
pressing the button does not actually clean the
lenses.) Refer to
for complete lens cleaning instructions.
0 2. 9 8 1 2. 0 0 01 A
T
ROUBLESHOOTING AND
for more
"Cleaning the Lenses" on page 57
Test Sub-Menu Screens
M : T
AINTENANCE ESTING
Press TEST to
bring up Test screen
4
41