Lamp Screen; Configuration Screen - PRG bad boy User Manual

Lamp Screen

• Lamp Hours- displays total lamp hours. Lamp hours are shown in
green if under threshold, yellow if close to threshold, or red if over
threshold. Press to bring up Reset Lamp Hours Yes/No options.
• Strikes - displays number of times the lamp has been struck.
• Max Power - sets maximum power limit. Press to bring up 900/1200/
1400 options. (This setting is also accessible from the Control
Channel. Refer to
• Power On - sets option to strike lamp automatically upon power up.
Press to bring up Start/Wait options.
• Start/Douse - displays current lamp status. Press to bring up Start or
Douse Yes/No options (depending on current lamp state).
• Power - displays lamp power level.
• Temp - displays head temperature in Celsius and Fahrenheit. The
temperature is shown in green if under limit, yellow if close to the limit, and red if over the limit.
• Fans - displays fan status as OK if all fans are running, or ERR (red) if any of the luminaire's fans
are not running.
Press EXIT to return to

Configuration Screen

• Display - configures orientation of the Menu Touchscreen. Press to
bring up Auto/Up/Down options.
• Reset Defaults - resets all configuration settings and address to
default values. Press to bring up Reset All Defaults Yes/No options.
• Pan/Tilt - displays summary of pan/tilt settings:
lock = pan or tilt is locked
swap = pan/tilt is swapped.
invert = pan or tilt is inverted
Press to bring up
• Universe Format - displays alpha/numeric universe format. Press to
bring up Alpha/Numeric options.
• DMX Address - displays current DMX512 address. Press to bring up
numeric keypad for inputing the address.
• Universe - displays current universe. Press to bring up alpha keypad
or numeric keypad, based on universe format selection.
Press EXIT to return to
0 2. 9 8 1 2. 0 0 01 A
page 31.)
Home Screen.
Pan/Tilt Screen.
Home Screen.
O : M S
PERATION ENU YSTEM
Lamp Screen
Configuration Screen
3
25