Table of Contents
Advertisement
Status Screen
•
Mechanisms - displays mechanism status. Mechanism names will be
shown in yellow while calibrating, then change to green if okay or red
if an error exists. Press to bring up Recalibration Screen.
•
Log - displays system log. Use touchscreen arrows to scroll up or
down. Press CLR to bring up Clear Log Yes/No options.
Press EXIT to return to
Test Screen
•
Re-Cal - press to bring up Recalibration Screen.
•
Re-Call ALL - press to bring up Re-Cal ALL Yes/No options.
•
Disable - press to bring up Disable Screen.
•
Mech Test - press to bring up Mech Test Screen. (See
Tests" on page 42
•
Clean Lenses- press to position lenses so that all surfaces may be
cleaned with a cloth. (Note that pressing the button does not actually
clean the lenses.)
Press EXIT to return to
0 2. 9 8 1 2. 0 0 01 A
Home
Screen.
for more explanation of this screen.)
Home
Screen.
Test Sub-Menu Screens
O
: M
PERATION
Status Screen
"Mechanical
3
S
ENU
YSTEM
Test Screen
27
Advertisement
Table of Contents
Troubleshooting
