Table of Contents
Advertisement
B
B
™ S
L
U
M
AD
OY
POT
UMINAIRE
SER
ANUAL
Starting the Lamp
The lamp can be started (turned on) via console command or at the luminaire itself by using the Menu
Touchscreen.
To start lamp using Menu Touchscreen:
Step 1. At Home screen, press LAMP panel.
Step 2. At Lamp screen, current lamp status (ON/OFF) will be displayed. Press Start/Douse panel to
bring up Start/Douse YES/NO options.
Figure 2-11: Starting the Lamp
Step 3. Press YES to start lamp.
The luminaire can also be configured to power up with its lamp on or off, and the maximum lamp
power level can be set via the Lamp screen. For details about all lamp configuration options, refer to
"Lamp Screen" on page
25.
Configuring Universe, Comm, and Other Options
Other luminaire configurations can be set using the menu screens available at the Menu Touchscreen.
Refer to
"Menu System" on page 22
for complete instructions on using these features.
2 0
02.9812.0001A
Advertisement
Table of Contents
Troubleshooting
