Removing The Print Cartridge - Bryce 30K User Manual

When the Ink Low LED indicator is blinking the Print
Cartridges are nearly empty and have to be changed soon. Use
the following steps to remove used or damaged Print
Cartridges.
1. Remove the Top Cover.
2. Grasp the latch on top. Lift up
on the latch. The cartridge will
"pop" loose.
2. Grasp the handle on the ink
cartridge and lift the print
cartridge out of the cradle.
Note: Reset the Ink
Count in the Main
Menu after replacing a
Revision C
Ink Cartridge.
30K USERS MANUAL
P/N 90-00203-001
Setting up the Printer
Removing
the Print
Cartridge
Section 3 - 6