Bryce 30K User Manual page 108

Super Draft
Draft
Letter
Executive
Printing Speeds in #10 envelopes per hour
Super Draft
Draft:-
Letter:-
Executive:-
Fonts
12 Internal Fonts that are scalable
Point Size
Smallest
4 point
The Interface Panel
The interface panel is located on the side of the machine. It contains the main power switch, the power
receptacle and fuse. The interface ports (parallel and USB) are the interface connections between the
30K and your computer.
1. Connect the line cord from the printer receptacle to a properly grounded outlet box. Do not use
an adapter plug. Avoid using outlets that are controlled by wall switches and shared with other
equipment.
2. Connect the interface cable from the computer to the appropriate connector on the printer
interface panel. The typical cable length is six (6) feet long (182. 9 cm) for parallel and fifteen
(15) feet (457.2 cm) long for serial.
Revision C
Print Quality
Throughput / Hr
30K USERS MANUAL
P/N 90-00203-001
Appendix G Technical Specifications
600 x 150 Dots per inch
600 x 200 Dots per inch
600 x 300 Dots per inch
600 x 600 Dots per inch
Min
Throughput / Hr
24,000
19,000
13,000
6,500
Largest
30 point
8" Media
30,000
22,000
15,000
7,500
Unlimited TrueType Fonts (downloadable)
2
Appendix G -