4.7 Bluetooth module
4.7
Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-10.
1. Disconnect the Bluetooth cable from the connector CN4400 on the system board.
2. Remove the following screw and Bluetooth module.
• M2×3S
3. Disconnect the Bluetooth cable from the connector on the Bluetooth module.
Bluetooth cable
libretto U100 Maintenance Manual (960-520)
S-FLAT HEAD screw
CN4400
Figure4-10 Removing the Bluetooth module
4 Replacement Procedures
×1
M2x3S S-FLAT HEAD
Bluetooth module
[CONFIDENTIAL]
4-21