Toshiba libretto U100 Maintenance Manual page 279

4.19 Harness assembly/Hinge
7. Remove the following screw and HNS duct from the slot.
• M2×4S
8. Take the harness assembly out from the HNS duct.
9. Separate the speaker and the speaker holder.
Figure 4-34 Separating the speaker and speaker holder
libretto U100 Maintenance Manual (960-520)
S-FLAT HEAD screw
Figure 4-33 Removing the HNS duct
Speaker
4 Replacement Procedures
×1
M2×4S S-FLAT HEAD
Harness assembly
HNS duct
Speaker holder
[CONFIDENTIAL] 4-53