Toshiba libretto U100 Maintenance Manual page 289

4.20 libretto DVD Dock
4.20.4 DS board
Removing the DS board
To remove the DS board, follow the steps below and refer to Figure 4-42.
1. Disconnect the DS cable from the connector CN9850 on the DM board.
2. Remove the following screw and DS board from the dock base.
• M2×4B
3. Disconnect the DS cable from the connector CN9860 on the DS board (back).
libretto U100 Maintenance Manual (960-520)
BIND screw
DS cable
CN9850
Figure 4-42 Removing the DS board
4 Replacement Procedures
×1
CN9860
M2×4B BIND
DS board
[CONFIDENTIAL] 4-63