Keyboard - Toshiba libretto U100 Maintenance Manual

4 Replacement Procedures
4.5

Keyboard

Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-5 and 4-6.
CAUTION: When removing the keyboard, hold the edge of it. Do not touch the key top.
Otherwise, the key top may drop.
1. Remove the following screw from the bottom of the computer.
• M2×14B BIND screw
2. Turn the computer face up and open the display.
3. Insert your fingers into the slot on both sides of the keyboard holder and lift it up.
4. Remove the following screw and keyboard hold plate.
• M2×4B
5. Remove the following screws and lift the upper side of the keyboard and turn it face
down on the palm rest.
• M2×3S
4-14 [CONFIDENTIAL]
BIND screw
S-FLAT HEAD screw
×1
×1
×2
libretto U100 Maintenance Manual (960-520)
4.5 Keyboard