Cleaning The Glass Components - High End Systems x.Spot User Manual

Cleaning the Glass Components

Warnings: Disconnect power before servicing.
Equipment surfaces may reach temperatures up to 130° C (266° F).
Allow the fixture to cool before handling.
You will need:
• a soft, lint-free cotton cloth
• mild glass cleaning solution (containing no ammonia)
To clean the internal glass components:
1. Disconnect power to the fixture. If the fixture has been operating, allow the
fixture to cool before handling.
2. Remove the bezel by loosening the 3 captive screws on each side.
3. Clean the dichroics, lithopattern and effects, color wheels, and lens using a mild
glass cleaner (containing no ammonia) and a soft, lint-free cotton cloth.
x.Spot ™User Manual General Maintenance 5-15
5