High End Systems x.Spot User Manual page 128

Warning: For Continued Protection Against Exposure To Excessive
Ultraviolet (UV) Radiation
1. Do not operate this equipment without complete lamp enclosure in place or if
shields, lenses, or ultraviolet screens are damaged.
2. Change shields, lenses, or ultraviolet screens if they have become visibly
damaged to such an extent that their effectiveness is impaired, for example by
cracks or deep scratches.
3. Never look directly at the lamp while lamp is on.
Warning: For Continued Protection Against Injury To Persons
1. Use secondary safety cable when mounting this fixture.
2. Caution: hot lamp may be an explosion hazard. Do not open for 5 minutes after
switching off. Wear eye and hand protection when re-lamping.
3. Equipment surfaces may reach temperatures up to 100° C (212° F). Allow 5
minutes for cooling before handling.
4. Change the lamp if it becomes damaged or thermally deformed.
C-2 Safety Information x.Spot ™User Manual