Secure The Air Duct - kozy heat Chaska CSK-31 Installation And Operating Manual

To install the #CSK-FLP floor protector
A. Set the floor protector, insulation side down, in
desired position over the exposed combustible
material flooring.
Place the insert in the fireplace opening on top of
the #CSK-FLP floor protector.
IMPORTANT:
The #CSK-FLP and bottom of the fireplace insert
are the same size & shape. Make sure that the
insert is properly aligned onto the #CSK-FLP
floor protector.
2. Slide the insert into the fireplace opening.
Figure F-2
3. If using the CSK-FLP floor protector, make sure that it is
properly positioned under the insert. Figure F-3.
Figure F-3
:
CSK-FLP Floor Protector
Figure F-1
#CSK-FLP
Floor Protector
- 4 . Secure the air duct onto the insert by positioning
the air duct into the channels at the top of the
insert and sliding the air duct forward until it
stops. Figures F-4 & F-5.
Figure F-4
Figure F-5
5. Secure air duct to the insert, at the front, with (2)
½" sheet metal screws (included in the fireplace
components packet). Refer to Figure F-6.
Figure F-6
Page 12
Position air duct into the
channels and slide forward.